By Dan Feildman




Digital cameras flash units come in many shapes and sizes. Low end digital cameras include low energy built in flash units. High end digital SLR cameras can support sophisticated external flash units which can provide superior lighting in difficult scenarios. Here are some basic facts about flash units both built in and external.

Many advances have been made with flash units since the early days of photography. In photography's infancy, flash units were using powder that was lit by electrical current and then "blown up" to generate the light energy. This method was most certainly a risk. It also proved a challenge as the flash units were not automatically in time with the camera's shutter so the photographer had to coordinate the flash to go off at the exact time the photo was shot.

The flash units of today are highly developed technology devices. The flash and camera are automatically synchronized using an electronic flash tube taking all of the pressure off of the photographer. Digital cameras today can determine themselves if a flash is necessary, can set their own intensity and other parameters and can trigger the flash at the precise tine the shutter is opened. All of this is done in the background with no manual effort. For those scenarios calling for a more hands on approach, digital cameras also include a manual mode where the user can set all of the same features to their specifications.

Flash units are separated into two categories: Internal built-in flash units or external flash units. Internal flash units are built into the camera. Most digital cameras include such a unit and let the user have some management over it through the camera's menus and buttons. External flash units are attached to the camera's body through a dedicated slide-in slot or by using an electrical cable. Not all digital cameras can support external flash units. Typically the lower end pocket cameras do not allow external flash units while all high end digital SLR cameras do allow external flash units. External flash units can differ greatly. They can have different mechanical characteristics and different light energy levels that they can emit. Some external flash units also include smart sensors to measure ambient light, distance and other optical parameters in order to get the most from the flash effect.

Both automatic and manual flash unit modes are made available on digital cameras. In automatic mode the camera measures ambient light and fires the flash it deems not enough ambient light is present. There can be times the camera will make a mistake in using the flash and will either fire or not fire the flash when the opposite was needed. Keep in mind the importance of setting the flash intensity. Should the flash unit fire too much light energy on objects that are too close to the camera the digital photo will be washed out. If the flash unit fires a small amount of light energy on an object that is farther away from the digital camera the digital photo will then be a too dark.

Flash units have limitations too. They can not light any scene and any object at any distance from the camera. It is important to know your flash unit limitations. For example check what the maximum light energy that it can emit is and what the farthest that an object can be effectively lit from. This is also known as the effective flash range. If the object is out of the effective flash range it is actually better to turn off the flash altogether and use a tripod with a longer exposure. Sometimes it is useful to use the flash even if there is enough ambient light. In such cases you can manually force the camera to fire the flash. This is also known as fill-in flash as it is usually used to fill-in shadowed areas on objects in the digital photo.




About the Author:



0 comments

Web site development, PHP programming's Fan Box